Bearings Online Catalogue

Home > Bearings Catalogue Online > Deep Groove Ball Bearings

Bearing DPP10 (AST)

Airframe Control Ball Bearings: Single and Double Row DPP10

Bearing number : DPP10

Brand : AST

Bore Diameter (mm) : 15,875

Outer Diameter (mm) : 49,2125

Bearing dimensions and specification in AST catalogue:

(dimensions in inches)

Bearing Type - DPPxx

Bore Dia (d) - 0.6250

Outer Dia (D) - 1.9375

Outer Width (Bo) - 0.9200

Inner Width (Bi) - 0.9950

Dynamic Load Rating (Cr) - 13,100

Static Load Rating (Cor) - 28,400

Max. Shaft Shoulder Dia. Inner (Li) - 0.9

Ball Qty - 24

Ball Dia (Dw) - 0.3430

Max. shaft corner radius, or 45 deg. chamfer (ch1) - 0.015

Max. housing corner radius, or 45 deg. chamfer (ch) - 0.044

Material - 52100 Chrome steel or equivalent

The dynamic load rating given is for outer race rotation. The dynamic load rating for inner race rotation is 15300 pounds.

The static thrust load rating is 9400 pounds.

The bore diameter tolerance is +.0000 / -.0005".

The outside diameter tolerance is +.0000" / -.0005".

The tolerance for the inner race width and the outer race width is +.000" / -.005"

The load ratings listed for these bearings are determined by the formulas used specifically for airframe bearings. These ratings are not equivalent to ratings calculated from the ABMA formulas used for most antifriction bearing products.

This bearing is intended for commercial applications. You must notify the AST sales department contact at the time of your inquiry if the bearing will be used in an airworthy application.

The bearing has two removable seals made of woven fabric Teflon.

Tags :  AST